Bài viết sưu tầm

The same, if you want to copy from TFTP Server to ASA Firewall.

FW-ASA-DTU# copy tftp:/192.168.20.1/cs427a.txt disk0:/cs427

Address or name of remote host [192.168.20.1]? 192.168.20.1

Source filename [/192.168.20.1/cs427a.txt]? cs427a.txt

Destination filename [cs427a.txt]? cs427a.txt

Accessing tftp://192.168.20.1/cs427a.txt...!

Writing file disk0:cs427a.txt...

!

5 bytes copied in 0.100 secs

FW-ASA-DTU#

FW-ASA-DTU# show disk0:

Using FTP

From a command line:

1. Enter the following command:

copy ftp://[username[:password]@][/path]/filename {flash:/ | disk0:/ | disk1:/ } [path/] filename

Example:

copy ftp://cisco:XXXXX@x.x.x.x/ asa921-smp-k8.bin disk0:/ asa921-smp-k8.bin

2. ASA will confirm the server and filename, review each and press enter:

Address or name of remote host [x.x.x.x]?

Source username [cisco]?

Source password [XXXXX]?

Source filename [asa921-smp-k8.bin]?

Destination filename [asa921-smp-k8.bin]?

3. If the ASA can communicate with FTP server, you should see a bunch of !!!!!!! filling your screen. Monitor this process, if you do not have enough space in the location you’re copying the file to, you will receive an error during the write process.

Using HTTP(S)

From a command line:

1. Enter the following command:

copy http[s]://[username[:password]@][:port] [/path]/filename {flash:/ | disk0:/ | disk1:/ } [path/]filename

Example:

copy http://cisco:XXXXX@x.x.x.x:80/ asa921-smp-k8.bin disk0:/ asa921-smp-k8.bin

2. ASA will confirm the server and filename, review each and press enter:

Address or name of remote host [x.x.x.x]?

Source filename [asa921-smp-k8.bin]?

Destination filename [asa921-smp-k8.bin]?

3. If the ASA can communicate with HTTP server, you should see a bunch of !!!!!!! filling your screen. Monitor this process, if you do not have enough space in the location you’re copying the file to, you will receive an error during the write process.

Using SSH/SCP

The SCP method is the most secure. Before using the method, you need to make sure SCP is enabled on the firewall.

1. Enable SCP on the ASA

To use the SCP method, you must first enable it on the firewall:

hostname(config)# ssh scopy enable

2. Copying files to the ASA

From a Unix/Linux host with OpenSSH or Tectia SSH installed:

Enter the following command:

scp –v username@asa_address

Example: scp –v asa921-smp-k8.bin cisco@x.x.x.x

References

[1]http://www.mustbegeek.com/configure-ssh-access-in-cisco-asa/

[2]https://cuongquach.com/firewall-asa-bai-1-cau-hinh-co-ban.html

[3]https://learningnetwork.cisco.com/thread/76581

[4]Nhóm tác giả TT Tin học VNPro, CCSP LABPRO (ISCW, SNRS, IPS & CSMARS, SNAF & SNAA), NXB Thông tin & Truyền thông.